A well designed Composite system like Ventura Fiber Tech gratings is needed for flooring, walkway and decking areas in corrosive environment for superior load bearing and corrosion resistance. This can be achieved with the use of good quality grade resins With UV inhibitors and other additives with sufficient glass fiber reinforcement.
Ventura Fiber Tech offers Pultruded as well as Molded Composite Gratings:
Ventura Fiber Tech make FRP cable trays are easy to install & gives the maximum life other than any material in corrosive atmosphere & due to its non-conductive property it decreases the chances of short circuit.
Ventura Fiber Tech is one of the India's leading producers of molded grating. Renowned for their high strength, corrosion resistance in the harshest environments, long life and safety. Molded Gratings meet the highest international standards. Produced from carefully selected resin systems, Ventura Fiber Tech Grating is designed to deliver many years of reliable service, outperforming the traditional materials they replace.
Comparable with steel at the installed cost stage, their low maintenance and long life means a significantly lower life cycle cost than that of steel. Fiberglass Molded Gratings are available with Polyester, vinyl ester or phenolic resin. All kinds of resin are self-extinguishing and UV- stabilized.
Fiberglass Molded Gratings are made into various mesh patterns and surface suitable for demanding applications.
Ventura Fiber Tech Grating complies standards stipulated by FGMC of (Fiberglass Grating Manufacturer’s Council) of ACMA (American Composite Manufacturing Association)
Product Code | Height(MM) | Mesh Size (MM) | Rib Thickness (MM) | Open Area(%) | Sheet Size (MM) |
---|---|---|---|---|---|
SM 12 x (50 x 50) | 12.5 | 50x50 | 6-5 | 82 | 1007 X 2007,1007 X 4047 |
SM 25 x (38x38) | 25 | 38x38 | 7-5 | 69 | 1220 X 3660,1007 X 2007* 1007 X 4047*. 1247 X 4047* |
RM 25 x (25x100) | 25 | 25x100 | 6.35 | 68 | 1220X3660 |
SM 30 x (38x38) | 30 | 38x38 | 7-5 | 68 | 1220 X 3660,1007 X 2007* 1007 X 4047*, 1220 X 4045 |
SM 38 x (38x38) | 38 | 38x38 | 7-5 | 68 | 1220 X 3660,1007 X 2007* 1007 X 4047* 1247 X 4047* |
SM 50 x (50x50) | 50 | 50x50 | 8-5 | 71 | 1220X4068 |
MM 30 x (20 x 20) | 30 | 20x20 (Mini) | 7-5 | 42 | 2003 X 740 |
Fiberglass Molded Gratings are produced by wet moulding and hot curing in a heated mould. The reinforcement consists of continuous fibreglassrovings in alternating layers, so the loads are distributed evenly in all directions. Regularly Molded Fiberglass Gratings have a polyester resin matrix. Glass content is approximately 35%. Standard colors are green, yellow or grey, other colors are available according to RAL.
The first step to ensure maintenance - free flooring solution is Ventura Fiber Tech Grating. Having an appropriate resin makes highest performance in the most demanding circumstances. Ventura Gratings are available in five standard resin grades which are highly economical while they maintain high standards of performance.
Resin Type | Resin Base | Description | Flame spread rating ASTM E84 |
---|---|---|---|
Type V | Vinyl Ester | Superior Corrosion Resistance & Fire Retardant | Class 1, 25 or less |
Type IFR | Isopthalic Polyester | Industrial Grade Corrosion resistance & fire retardant | Class 1,25 or less |
Type 1 | Isopthalic Polyester | Industrial Grade Corrosion resistance in acidic environment | Non fire retardant |
Type P | Phenolic | Low smoke and superior Fire Resistance | Class 1, 5 or less |
Parameters | FiberGlass Gratings | Hot Dipped GI | SS |
---|---|---|---|
Life Span | High | Moderate | High |
Strength To Weight Ratio | High | Low | Low |
Life Cycle Cost | Low | High | High |
Corrosion Resistivity | Very High | Moderate | High |
Chemical Resistivity | Very High | Moderate | High |
Electrical Conductivit | Nil | High | High |
EMI / RFI Transparency | High | Nil | Nil |
Installation Cost | Low | Moderate | Moderate |
Handling | Very Easy | Difficult | Difficult |
Anti Skid | Available | NA | NA |
Color Range | Available | NA | NA |
This is the best solution to work in total safety in worst conditions (presence of water, ice, oil, wax, grease, etc.)The particular integration of the silica grains assures an excellent wear resistance and a long-lasting durability of the surface.
Classified: R-13-V10 according to the DIN 51130 norm.
An alternative to the traditional anti-skid surface proposed with a competitive price. Suitable for applications where the user is not as frequent but safety is the same a fundamental requirement.
Classified: R-13-V10 according to the DIN 51130 norm.
This surface allows the separation between two levels: it prevents drippings or smoke to pass and assures complete safety for below pedestrian transit. The right solution for applications where for lift and trolley transit is frequent.
Classified: R-13-V10 according to the DIN 51130 norm.
Customized grating colors and special resin systems can be formulated as an option to the customer’s requirements.
Suitable for occasional use, this surface is made by molding the resin creating an anti-skid surface without using silica grains replicating traditional metal checker plates.
Deflection Span (mm) | Kg/M | Break Point | ||||
---|---|---|---|---|---|---|
75 | 150 | 300 | 450 | 750 | ||
300 | 0.254 | 0.508 | 1.016 | 1.524 | 2.54 | 4470 |
450 | 0.762 | 1.524 | 3.302 | 3.826 | 8.128 | 2980 |
600 | 1.778 | 3.81 | 7.62 | 11.176 | 2235 | |
750 | 2.794 | 5.588 | 11.43 | 1788 | ||
900 | 5.334 | 10.668 | 1490 |
Deflection Span (mm) | Kg/M | Break Point | |||||
---|---|---|---|---|---|---|---|
350 | 500 | 750 | 1000 | 1500 | 2500 | ||
300 | < 0.254 | 0.254 | 0.508 | 0.508 | 1.016 | 1.524 | 2928 |
450 | 1.016 | 1.524 | 2.286 | 3.048 | 4.572 | 7.62 | 12980.8 |
600 | 3.084 | 4.572 | 7.112 | 9.398 | 7320 | ||
750 | 5.842 | 8.89 | 4084.08 | ||||
900 | 3226.8 |